WE RECOMMEND USING THE FOLLOWING APPROACH
TO CLEANING AND SANITIZING THE M108 and M108s:
After trimming, use a diluted degreaser to clean the plant-touching parts of the machine as per the table below. Note, there are many effective degreasers available on the market. We have A list of cleaners on our Cleaning Solutions page which we have hands-on experience using. Use the recommended pH range to select a product appropriate to the intended use.
Handy tip: before starting this cleaning routine, the thick resin build-up on blades and other parts can be scraped off using a plastic razor such as this: Scraperite Plastic Razor Blades.
Swab test surfaces. Any parts that exceed established limits can be cleaned/rinsed again or can be wiped down with iso*.
*Note: Do not apply iso to the end caps of the tumbler on models A, B, & C as the iso will break down this material. Modern end cap materials are safe to be wiped with iso.
Example of tumbler model on end caps.