A Hot Swap is the process where you change out the AirThread Tension Tumbler, bed knives and helical blades mid-trim session. The concept is to restore optimum performance and keep trimming without stopping for a complete cleaning of the machine.
Want to add a Hot Swap Kit to your trim room?
Item |
Part # |
Quantity |
Use |
Picture |
Airthread Tension Tumbler |
Cradles flower during trimming and facilitates blade access. Plant-touching component to be replaced during a hot swap |  |
||
HELICAL BLADE ASSEMBLY |
As required to hot swap one M108S. Plant-touching component to be replaced during hot swap. |  |
||
BED KNIFE ASSEMBLY |
Box of three knives as required to hot swap one M108S. Plant-touching component to be replaced during hot swap. |  |
||
SPACER BAR |
Box of three spacer bars as required to hot swap one M108S. Plant-touching component to be replaced during hot swap. |  |
||
TRIM TOTE WITH GASKET |
Trim receptacle component of Integrated Separation System. Plant-touching component to be replaced during hot swap. |  |
||
BRUSH ASSEMBLY |
Ensures flower flow in tumbler. Plant-touching component to be replaced during hot swap. |  |
||
ELECTRICAL BOX FILTER MESH
|
Particulate screen to be replaced as required. Should be checked regularly. |  |
||
SOAK ‘N’ STORE TUBS |
Multi-purpose tub for cleaning and storage. Accommodates blade storage racks. |  |
||
HELICAL BLADE STORAGE
|
Multi-purpose rack that accommodates up to three helical blades for cleaning, or three full blade cartridges for storage (3 helical blades, 3 bed knives, 3 spacer bars) |  |
||
HELICAL BLADE SUPPORT RACK |
Rack that cradles three helical blades to facilitate cleaning bearing ends which should not be submerged in cleaning solution. |  |
||
BED KNIFE & SPACER BAR
|
Stackable rack for safe cleaning and storage of three bed knives and three spacer bars. Bed knives can be inserted blade-up to accommodate cleaning. Rack fits in Soak ‘n’ Store Tubs and can be submerged in cleaning solution. |  |
