This video will show you how to remove the indoor casters and replace with optional outdoor wheels.
Watch the video, or view the step-by-step guide further down the page. Hover over each photo to see process.
CHANGING THE MBX BUCKER WHEELS
This video will show you how to remove the indoor casters and replace with optional outdoor wheels.
Watch the video, or view the step-by-step guide further down the page. Hover over each photo to see process.
Unscrew the 4 bolts holding the caster to the underside of the bucker using a 7/16” socket or box end wrench
Place one of the u-shaped brackets over the foot of the bucker, aligning it approximately with where the old wheel was.
Remove the nut and one of the large washers from the end of the axle on one of the outdoor wheel assemblies, keeping the rest of the assembly intact.
Align and push the axle of the wheel assembly through the hole in the bracket
Place the washer and the nut on the end of the axle.
Use channel locks or vise grip locking pliers to hold the axle in place.
Using a 15/16” box end wrench or socket, tighten the nut.
Repeat these steps for the 3 other wheels.
info@mobiustrimmer.com
orders@mobiustrimmer.com
Contact Form
Service / Warranty Submission